Manufacturer of wheat beater

Release time：2023-09-10    Click：208

When using a wheat applicator, there are some things to pay attention to, all of which are to ensure that there are no problems during operation. Below, the editor will briefly introduce the precautions for its use:

Turn on the circuit oil circuit switch, close the choke valve, place the throttle in the medium speed position, fix the gasoline engine with your left hand, pull the starting wheel handle with your right hand, and slightly pull the pull rope. When you feel that the starting claw has already rotated out of contact with the starting disc and rotated coaxially, use force to smoothly and quickly pull the starting wheel handle in a water square direction several times until the gasoline engine starts. After starting, open the choke and adjust the throttle to the appropriate position.

Close the water pump discharge valve and adjust the pressure (usually 15-20 for long guns and 10-15 for short guns) before starting operation.

Note: Improper starting methods (excessive pump oil or too many times of slowly closing the air door) can easily cause cylinder flooding failure. At this time, the spark plug should be removed, and the starting rope should be quickly pulled several times with additional force to discharge excess oil before restarting.