Corn field dedicated pesticide applicator

Release time：2023-08-23    Click：209

It is inevitable that there may be some oil stains on the corn field special pesticide applicator during normal use, especially after a long time of use. Therefore, users need to clean their memory. However, many friends are not very familiar with it, but it's okay. Today, I will briefly introduce it to you:

1. Aluminum alloy cleaning solution removes oil stains. Due to the strong corrosive effect of alkaline solutions on aluminum alloys and the high cost of organic solvents, aluminum alloy cleaning solution can be prepared when cleaning aluminum alloy parts. Generally, sodium silicate or sodium carbonate solution is added with a small amount of potassium dichromate to prepare, and heating to 60-70 ℃ can achieve the desired effect.

2. Alkaline solution removes oil stains. The removal of animal, vegetable, and mineral oils from the surface of parts can be achieved by adding a small amount of emulsifier to a solid re germinating solution, heating, and cleaning. If pressure spraying is used, the effect is better. After cleaning, spray with heated water to rinse off any remaining alkaline solution on the surface of the parts.

3. Organic solvents remove oil stains. To prevent the corrosion of precision parts (such as high-pressure oil pumps, injectors, etc.) by alkaline solutions, organic solvents (such as gasoline, kerosene, alcohol, etc.) can generally be used for cleaning.

In fact, the method of removing oil stains using a corn field dedicated pesticide applicator is very simple and not too difficult. As long as everyone can grasp the above points, it is enough.