What are the precautions for operating a rice applicator?

Release time：2023-08-15    Click：213

During the growth process of crops, they are very susceptible to pests and diseases. When dealing with pests and diseases, we often use a pesticide applicator to facilitate pesticide spraying on farmland. The operation of the rice pesticide applicator is simple and efficient, so what are the precautions to be taken when operating the rice pesticide applicator? Now let's give you a brief introduction.

Picture of Rice Pesticide Dispenser

Firstly, it is necessary to use regular gasoline in the rice applicator. Gasoline can provide power and energy for the engine of the applicator, and the use of inferior gasoline can affect the effectiveness of the applicator. Moreover, when the applicator is not in use for a long time, it is necessary to drain the gasoline in the mailbox.

During the operation of the rice applicator, vehicles should run at a uniform speed and pay attention to passing vehicles and pedestrians; Spraying operators should pay attention to passing vehicles and pedestrians. If necessary, turn the spray switch down or off; At the same time, pay attention to securing vehicles and other objects and items that may be injured by the medication. And during work, staff should not stay away and always pay attention to the medication truck.

Before using the rice applicator each time, it is necessary to check whether the various components of the machine are fully installed and fastened. If any looseness is found, it should be reinforced in a timely manner. When we need to clean up debris or repair the dispenser, we must first turn off the dispenser. Paper air filter cartridges need to be cleaned regularly to ensure the service life of the dispenser.

During operation, the person who takes over the shift must ensure that the rice applicator is functioning properly, and that the oil and lubrication are functioning properly. If there are abnormalities and the cause cannot be found, it is necessary to explain them clearly to the successor and keep records. Before shutdown, the pressure regulating handle must be pulled to the unloading position. If the shutdown lasts for more than one hour, the oil tank switch must be turned off, and then the pressure regulating handle shall be placed at the specified place after returning to the team.

After the spraying operation of the rice applicator is completed, it is necessary to continue spraying with clean water for a few minutes to clean the residual liquid in the pump and pipeline. Then, it is necessary to dehydrate and run for a few minutes to drain the residual water in the pump. Additionally, the work clothes, hats, masks, and goggles worn during the spraying process must be cleaned thoroughly.

There are many precautions to be taken when operating a rice applicator. The machine travels between rice rows, including straight walking and turning in the field. It is necessary to avoid crushing rice plants as much as possible. When there is any malfunction in the machine, the operation should be stopped and handled normally before starting work.