Do the dispensers require oil lubrication?

Release time：2023-08-13    Click：218

A pesticide applicator is a type of agricultural machinery that disperses liquids. It is a type of agricultural pesticide applicator and belongs to the category of portable agricultural machinery. However, as the usage time increases, the work efficiency will gradually decrease. Oil lubrication has a certain effect on improving work efficiency. Today, I will give you a brief introduction.

Picture of the dispensing machine

All idle parts of the dispenser should be lubricated in a timely manner, especially the bearings. Regular inspection should be carried out to prevent loss due to oil shortage. Adding gasoline must be stopped and completely cooled, and smoking is strictly prohibited. Keep away from ignition sources. Clear water must be used when dosing the dosing machine, and a filter screen must be added to the top cover of the medicine bucket when the liquid medicine is mixed to prevent blocking the spray head and affecting the working efficiency.

The selection of oil for the dispenser should be based on the ambient temperature of the dispenser. When the ambient temperature is low, the oil should have good fluidity, and when the temperature is high, it should have appropriate kinematic viscosity, as this has a significant impact on the performance and service life of the engine. Moreover, the quality and correct use of engine oil not only affect the performance and lifespan of gasoline engines, but also affect the lifespan of the oil.

Check the oil level of the dispensing machine before each operation to ensure good lubrication effect of the machine. Check the lubricating oil level of the high-pressure pump and ensure it does not fall below the scale mark. Check if the gasoline is sufficient and if the air filter is clean. Are various fixing screws tightened, whether the length of the high-pressure pipe is sufficient, and whether there is any damage.