Precautions for Operation of Rice Pesticide Dispenser

Release time：2023-08-11    Click：238

Precautions for operating the rice pesticide applicator:

After the rice spraying machine finishes the spraying, gently rub the spray and nozzle with your hands, and then pour the detergent into it. During the spraying process, there should be no foreign matter or blockage of the nozzle. If nozzle blockage or oil stains are found, they should be replaced in a timely manner, and attention should be paid to turning off the machine and maintaining air circulation after injection.

Before the rice sprayer shuts down, the pressure regulating handle must be pulled to the unloading position. If the machine shuts down for more than an hour, the oil tank switch must be turned off, and it shall be placed at the specified place after returning to the team.

After the spraying operation of the rice applicator is completed, it is necessary to continue spraying with clean water for a few minutes to clean the residual liquid in the pump and pipeline. Then, it is necessary to dehydrate and run for a few minutes to drain the residual water in the pump. Additionally, the work clothes, hats, masks, and goggles worn during the spraying process must be cleaned thoroughly.

The rice sprayer should pour the liquid medicine into the spray to avoid drug leakage. If there is water drop in the oil tank, please grasp the water drop with your hand immediately. The spray should be cleaned frequently. It can be used again after more than an hour.

The above is a list of precautions for the operation of rice applicators. I hope it can be helpful to everyone in the list of precautions for the operation of rice applicators. The above content can be reviewed if necessary.