Maintenance methods of self-propelled corn sprayer in spring

Release time：2023-08-04    Click：257

Spring is a time when self-propelled corn sprayers are used more frequently, as there are many pests in spring. However, when using the sprayer, it is important to pay attention to its maintenance. It is important for everyone to understand this.

Self-propelled corn applicator

Self-propelled corn applicator

1. When the self-propelled corn applicator is first used, it is necessary to remember to change the oil once after 5 hours, and then every 30 hours. When changing the oil, the power machine and pump body also need to be changed at the same time, and when changing the oil, it is necessary to replace it with a hot engine. This is something that everyone should remember.

2. Another thing is to replace the filter element of the corn applicator after working for 50 hours during use, in order to avoid blockage during later use. Although it may be a bit troublesome, I hope everyone can remember.

3. The air filter element should be checked regularly, and when the machine feels weak or difficult to start, clean the filter. The paper filter element should be blown out of dust by a fan or knocked out. Sponge filter elements can be cleaned with soap and water or other detergents, and then installed and used after drying.

4. After the work is completed, it is also necessary to check the entire corn beater to see if there is any looseness in the working parts. If there is, remember to tighten it in a timely manner. After the work is completed, it is also necessary to rinse the medicine barrel, pump body, and pipe gun with clean water. This should be remembered.

The above is a brief introduction by the editor about the maintenance of the self-propelled corn applicator in spring, hoping to bring some help to everyone.